ETG 1000 PFC/1 - FM Mosfet Exciter 1 kW OUT with PFC

GENERAL FEATURES
Operating band:	87.5 ÷ 108 MHz
Frequency step:	10 kHz
Modulation type:	F3 direct frequency modulation of VCO
Power amplifier technology:	MOSFET
Nominal power:	1000 W
Output power stability:	+/- 0.1 dB
Output Impedance:	50 Ohm
RF output connector:	"N" Female, 7/16", LC, 7/8"
Harmonic and spurious attenuation:	< -80 dBc
Frequency stability:	within 1 ppm
Residual AM:	asynchronous 0.1% ( typ.); synchronous 0.2% ( typ.)
Dimensions:	48.5L X 45.5D X 13.5H cm
Weight:	22 Kg
Power supply voltage:	115 / 230 VAC singlephase
Power Consumption :	1600 VA typ. @ 1000 W RF
Cooling System:	Forced air-cooling

 

AUDIO L/R INPUT
Frequency response:	± 0.15 dB (16 Hz ÷ 15 kHz) -45db at 19 kHz
Stereo separation:	better than 65db @ 1kHz
Pilot tone:	19 kHz ± 1kHz
Input impedance:	10 kOhm - 600Ohm (adjustable) Balanced
Gain control:	-12dB ÷ +12 dB steps by 0.1 dB
Connector type:	XLR female
19KHz attenuation:	>45 dB

 

ENVIRONMENTAL CONDITIONS
Operating conditions temperature:	0°C ÷ +45°C
Non-operating conditions temperature:	-20°C ÷ +50°C
Operating conditions humidity:	95% @ +40°C
Non-operating conditions humidity:	90% @ +65°C
Operating conditions altitude:	< 4600 m. s.l.m.
Carrying altitude:	< 15.000 m. s.l.m.

 

MPX INPUT
Impedance:	10 kohm unbalanced input
Frequency response:	± 0.1 dB (30 Hz ÷ 100 kHz)
Intermodulation distortion:	0.05% two-tones 1kHz and 3 kHz measurements
THD+N:	< 0.03% @ 1 kHz
S/N CCIR:	better than 72dB referred to 75kHz
Connector type:	BNC female

 

SCA INPUT
Input Impedance:	10 kOhm unbalanced input
Connector type:	BCN female

 

ENVIRONMENTAL CONDITIONS
Operating conditions temperature:	0°C ÷ +45°C
Non-operating conditions temperature:	-20°C ÷ +50°C
Operating conditions humidity:	95% @ +40°C
Non-operating conditions humidity:	90% @ +65°C
Operating conditions altitude:	<4600 m s.l.m.
Carryng altitude:	<15000 m s.l.m.

For more information, please contact us at:
office@insatelectronics.com
tel. +359 2 8313065
fax +359 2 9313469