|
ETG 151 - FM
Mosfet Exciter 150 W OUT
| MAIN
FEATURES |
| Operating
band: |
87.5 ÷
108.0 MHz |
| Frequency
step: |
10 kHz |
| Modulation
type: |
F3 direct
frequency modulation of VCO |
| Power
amplifier technology: |
MOSFET |
| Nominal
power: |
150 W |
| Output
power stability: |
+/- 0.1 dB |
| Output
Impedance: |
50 Ohm |
| RF
output connector |
"N"
female |
| Harmonic
and spurious attenuation: |
< -80 dBc |
| Frequency
stability: |
within 1 ppm
|
| Residual
AM: |
asynchronous:
0.1% - synchronous: 0.2% (typical values) |
| Weight: |
22
Kg |
| Dimensions(
W x H x D): |
48.5 x 45.5 x
13.5 cm |
| Power
supply voltage: |
115/230 V
singlephase |
| Power
Consumption: |
300 VA typ. @
300 W RF |
| Cooling
system: |
forced
air-cooling |
| AUDIO L/R
INPUT |
| Frequency
response: |
±0.1dB (16Hz
÷ 15kHz) -45dB @ 19 kHz |
| Stereo
separation: |
better than 65dB
@ 1kHz |
| Pilot
tone: |
19 kHz ± 1Hz |
| Input
Impedance: |
10 kOhm - 600Ohm
(adjustable) Balanced |
| Gain
control: |
-12dB ÷
+12 dB steps by 0.1 dB |
| Connector
type: |
XLR female |
| 19KHz
attenuation: |
>45 dB |
| MPX INPUT |
| Impedance: |
10kOhm
unbalanced input |
| Frequency
response: |
±
0.1 dB (16Hz ÷ 100kHz) |
| Gain
control: |
-12dB
÷ +12 dB steps by 0.1 dB |
| Intermodulation
distortion: |
0.05% two tones
1kHz and 3 kHz measurement |
| THD+N: |
< 0.03% @
1kHz |
| S/N
CCIR: |
better than 72dB
referred to 75kHz |
| Pre-emphasis: |
50/75 µs ± 0.1
dB |
| Connector
type: |
BNC
female |
| SCA INPUT |
| Input
Impedance: |
10kOhm
unbalanced input |
| Connector
type: |
BNC female |
| ENVIRONMENTAL
CONDITIONS |
| Operating
conditions temperature: |
-10°C ÷
+45°C |
| Non-operating
conditions temperature: |
-20°C ÷
+50°C |
| Operating
conditions humidity: |
95% @ +40°C |
| Non-operating
conditions humidity: |
90% @ +65°C |
| Operating
conditions altitude: |
<4600 m
s.l.m. |
| Carrying
altitude: |
<15000 m
s.l.m. |
|
