ETG 1000 PFC/1 - FM Mosfet Exciter 1 kW OUT with PFC



GENERAL FEATURES
Operating band: 87.5 ÷ 108 MHz
Frequency step: 10 kHz
Modulation type: F3 direct frequency modulation of VCO
Power amplifier technology: MOSFET
Nominal power: 1000 W
Output power stability: +/- 0.1 dB
Output Impedance: 50 Ohm
RF output connector: "N" Female, 7/16", LC, 7/8"
Harmonic and spurious attenuation: < -80 dBc
Frequency stability: within 1 ppm
Residual AM: asynchronous 0.1% ( typ.); synchronous 0.2% ( typ.)
Dimensions: 48.5L X 45.5D X 13.5H cm
Weight: 22 Kg
Power supply voltage: 115 / 230 VAC singlephase
Power Consumption : 1600 VA typ. @ 1000 W RF
Cooling System: Forced air-cooling

 

AUDIO L/R INPUT
Frequency response: ± 0.15 dB (16 Hz ÷ 15 kHz) -45db at 19 kHz
Stereo separation: better than 65db @ 1kHz
Pilot tone: 19 kHz ± 1kHz
Input impedance: 10 kOhm - 600Ohm (adjustable) Balanced
Gain control: -12dB ÷ +12 dB steps by 0.1 dB
Connector type: XLR female
19KHz attenuation: >45 dB

 

ENVIRONMENTAL CONDITIONS
Operating conditions temperature: 0°C ÷ +45°C
Non-operating conditions temperature: -20°C ÷ +50°C
Operating conditions humidity: 95% @ +40°C
Non-operating conditions humidity: 90% @ +65°C
Operating conditions altitude: < 4600 m. s.l.m.
Carrying altitude: < 15.000 m. s.l.m.

 

MPX INPUT
Impedance: 10 kohm unbalanced input
Frequency response: ± 0.1 dB (30 Hz ÷ 100 kHz)
Intermodulation distortion: 0.05% two-tones 1kHz and 3 kHz measurements
THD+N: < 0.03% @ 1 kHz
S/N CCIR: better than 72dB referred to 75kHz
Connector type: BNC female

 

SCA INPUT
Input Impedance: 10 kOhm unbalanced input
Connector type: BCN female

 

ENVIRONMENTAL CONDITIONS
Operating conditions temperature: 0°C ÷ +45°C
Non-operating conditions temperature: -20°C ÷ +50°C
Operating conditions humidity: 95% @ +40°C
Non-operating conditions humidity: 90% @ +65°C
Operating conditions altitude: <4600 m s.l.m.
Carryng altitude: <15000 m s.l.m.

За повече информация:
office@insatelectronics.com
тел. 02/831-30-65
факс 02/931-34-69










x